Sensor unit of this project consists with 14 high sensitive, configurable level detectors and USB interface. In this sensor unit we use Samsung’s KA2284 as amplifier, level detector, and PIC18F4550 8-bit MCU as data multiplexer and USB I/O controller. PC817 opto-isolators are used to interface between analog front-end and digital data processor. In this design both analog and digital circuits are physically and electronically isolated to minimize the noises and interferences.
In this design we use KA2284 because it is commonly available in local market (in Sri Lanka) and costs less then 0.1 USD. To reduce the interferences we use shielded cables between plants and sensor ICs. With the special wire we are using we may be able to extend the sensor connectivity up to 3m.
|Sensor board of musical plants project.|
PC application of this project is developed by using HIDAPI and irrKlang libraries. This application is designed to work with Microsoft Windows operating systems and we tested it on Windows 7 and Windows 10.
This project is an open source hardware project released under terms of MIT and CC BY-SA licenses. All the content of this project are available to download at hackaday.io or github.com. Conceptual details of this project is available at CoCA homepage.