Watch the video

I’ve cobbled together a video in which you can see me using Nanocounter in various different scenarios. I’ll measure the frequency of a couple of crystals and then hook up my GPSDO frequency standard for comparison.

Get the design files

If you’d like to modify the design files, or just want to upload the Gerbers to a PCB printing service then you can download them in a zip file from my downloads page. Click on the Hardware schematics and CAM files tab at the top of the page.

Final words

I hope that you’ve enjoyed reading this project as much as I’ve enjoyed building it. If you’ve got anything to say then please feel free to leave comments down below or use the forum to start a longer conversation.

[tps_footer]

Originally designed and Posted by Andy Brown at his website Andy’s Workshop here. Credit for all concepts, designs, photographs and design files directly goes to him. This article is selected by our staff to be featured at Electronics Infoline.

[/tps_footer]