Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

TinyK20, perfect for wearable computing

TinyK20, perfect for wearable computing

This project is about to build a small and tiny (48mm x 19mm) development board based on a Freescale Kinetis K20 device (ARM Cortex-M4 running at 50 MHz). The microcontroller pins are on the outside to use the board with a breadboard. The board includes the option for an micro SD card, 32 kHz clock and a 3.3V DC-DC converter. The ARM Cortex can be debugged with standard development tools (Eclipse, GNU, SWD).

Main Features



Advertisement


  • Freescale Kinetis K20DX128 Microcontroller (K20DX128VFT5)
  • ARM Cortex-M4, 50 MHz, 128 KByte FLASH, 16 kByte RAM
  • USB, ADC, DMA, FTM, I2S, I2C, PIT, GPIO, UART, TSIO, CMP, DAC
  • Internal 5V to 3.3V DC converter (120 mA)
  • Optional Micro SD card
  • Optional 32 kHz RTC clock
  • Optional 3.3V DC-DC converter
  • Compatible to OpenSDA circuit on Freescale FRDM boards
  • Microcontroller pins breadboard friendly on the outside
  • Standard ARM SWD (Single Wire Debug) for flashing and debugging
  • Detachable debugging circuit: board can debug external boards

Applications

  • Data logger
  • Wearables
  • Robotics
  • Debugger (OpenSDA, OpenOCD, pyOCD, CMSIS-DAP)

Example projects available for Eclipse (GNU ARM Eclipse with GNU lauchpad)/Kinetis design Studio.

Source: tinyK20, small uC board and debugger

 




Top