Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

# Stereo Power Amplifier 4W-8W with TDA2005

This circuit is a class AB stereo audio power amplifier designed by Quasar for quality hi-fi applications using a TDA2005 module. It is easy to construct and has a minimum of external components.The module has output current protection and thermal protection. This is circuit, which produces an excellent sound.
The supply voltage required 9V-18V DC at 1 to 2 Amps. Maximum output power will only be obtained with a power supply of at least 2A at 15V DC, and using 2 Ohm speakers or 2 by 4 Ohm speakers in parallel. However approximately 4W/ch. can be obtained with only a 15V DC, 1A supply into 4ohm loads. The C4-5 are input coupling capacitors and block DC, as do C9-13 which are the output coupling capacitors, and C8-12 which block DC from the feedback loop to the differential inputs. R2-3 and R4-5 set the level of feedback. C9/R6 and C13/R7 provide a high frequency load for stability where loudspeaker inductive reactance may become excessive. C1-2 provides power supply decoupling or filtering. The gain is equal to 1+(R2/R3)=1+(R4/R5)=37, or 31dB, minus any input attenuation. Reducing the feedback resistors R3 and R5 may increase the gain. The maximum supply voltage circuit is 18V. Check the power supply voltage and polarity before connecting to the circuit.

Part List
R1=120Kohm 1/2W 5% C1-9-13=100nF 100V MKT C7-11=2200uF 16V
R2-4=1.2Kohm 1/4W 5% C2=220uF 25V C8-12=220uF 25V
R3-5=33 ohm 1/4W 5% C3=10uF 25V IC1=TDA2005
R6-7=1 ohm 1/2W 5% C4-5=2.2uF 25V J1=2 Pole Terminal Block
RV1=2X10Kohm Log. Pot. C6-10=100uF 25V J2-3=3 Pole Terminal Block

Visit Here for more.